3-Speed USB-C Rechargeable Electric Screwdriver

$37.99 USD
$54.99 USD
รวมภาษี
Gondasp / Everyday tools

Less twisting.
More doing.

Make everyday screwdriving easier with the 3-Speed USB-C Rechargeable Electric Screwdriver. Let the motor handle repeated turns, then finish by hand with control you can feel.

3 speed modes Electric + manual USB-C charging
Black and red rechargeable screwdriver pictured with five long screwdriver bits
Speed meets control

Power through the turns.
Feel the final fit.

Repetitive fastening adds up. Electric assistance helps reduce repeated wrist turns, while manual finishing keeps the final adjustment in your hands.

Start with electric assistance

Use powered rotation to run screws in or out with less manual turning.

Finish with a steady hand

Once the screw seats, release the switch and tighten gently by hand.

Keep the same tool in hand

Move from powered turning to manual tightening without reaching for another screwdriver.

Gloved hand holding the screwdriver with a long driver bit fitted
Choose your setting

Three modes.
One compact tool.

Choose from three paired speed and torque settings. Select a mode below to compare the figures.

280 RPMNo-load speed
1.2 N·mElectric torque

The lowest speed and torque setting for a more measured pace. Check that the setting suits your screw and material.

340 RPMNo-load speed
1.6 N·mElectric torque

The middle setting provides a step up in both speed and torque for compatible everyday fastening tasks.

400 RPMNo-load speed
2.0 N·mElectric torque

The highest powered setting for faster repeated turns when the screw, material and task allow.

On the tool, press and hold the mode button to change settings. Speed figures are measured without load; actual speed varies with the task and battery charge.

Screwdriver details showing the LED work light, charging indicator and slide switch
Thoughtful everyday details

Easy to hold.
Simple to operate.

Rounded, textured grip

The palm-fitting handle gives you a comfortable hold for powered turns and manual adjustments.

Forward and reverse slide switch

Change rotation direction for tightening or loosening with a straightforward thumb control.

Built-in LED work light

Add light around the screw when working inside cabinets or in dim corners.

Charging indicator

Check charging status at a glance, then get the tool ready for your next project.

Keep it within reach

For the jobs that keep coming up.

A handy companion for compatible furniture fittings, household hardware and everyday assembly.

01 / ASSEMBLE

Build with less turning

Make repeated fastening easier when assembling furniture and accessories with suitable screws.

02 / ADJUST

Take care of small fixes

Keep a compact driver ready for loose handles, cabinet fittings and other routine adjustments.

03 / REMOVE

Back screws out easily

Use reverse rotation for repeated removal tasks, keeping the bit aligned with the screw head.

Recharge for the next project

USB-C convenience.
Cordless freedom.

Recharge between tasks through the USB-C port and work without a charging cable attached. The compact format fits easily into your everyday tool setup.

Use the charging cable and power supply specified in the supplied instructions. A USB-C port alone does not indicate support for USB-C-to-USB-C or fast charging.

Before you get started

A few useful answers.

Can I use it as a manual screwdriver?
Yes. Use electric assistance for repeated turns, then release the switch and finish tightening by hand. Apply force gradually and stay within the limits in the supplied instructions.
How do I change the speed?
Press and hold the mode button to cycle through the three settings: 280, 340 and 400 RPM. Each speed has a corresponding electric torque setting of 1.2, 1.6 and 2.0 N·m.
Does it tighten and loosen screws?
Yes. The forward and reverse slide switch lets you change rotation direction for installation and removal. Use a correctly fitting bit and keep it aligned with the screw.
Does the mode setting guarantee a final torque?
The listed figures describe electric output for each mode. They should not be treated as a calibrated final tightening specification. For fasteners that require a precise torque, use a suitable torque tool.
Can it replace a drill or impact driver?
This tool is designed for screwdriving with electric assistance and manual finishing. Choose equipment appropriate to the job for drilling, heavy fastening or seized screws.
What should I check when choosing a bit?
Match the bit to the screw head and confirm that its shank and retention groove are compatible with the tool. A matching nominal shank size alone does not guarantee that every bit will fit securely.

Make the next fix easier.

Powered turns. Comfortable handling. Manual control for the finishing touch.